Instant 3D printing quote
Welcome to the world of 3D printing! If this is your first time and you're a bit nervous please feel free to email us and we'll be happy to guide you through it.
Here at Empire 3D we strive to be the best at what we do. We take pride in our work and want you to be 100% satisfied with the service and product you receive.
At the moment our quoting engine is only set up with a handful of materials, if you would like to print in another material that is not listed please contact us instead as we have numerous options available.
Please note that the colours are just an indicative representation only.
If you have requirements not covered by the quoting engine please also contact us first.
If you're having trouble using the quoting engine will below click here for a step-by-step guide, otherwise contact us and we will be happy to process your order.
Follow these steps for an instant quote:
-
Drag-and-drop your 3D models in the quoting engine above.
-
Select your relevant parts and press "Configure".
-
Select the material you would like to print with from the "Material" drop-down menu.
-
As a starter material, PLA is a great general purpose plastic.
-
-
Enter the quantity of that part you would like printed.
-
Select the colour you would like.
-
Select the infill density you require.
-
20% is the default and is suitable for most purposes.
-
-
Select the precision required for the printed part.
-
This is also known as the layer height.
-
The default "Standard" setting is a 0.2 mm layer height and is suitable for most purposes.
-
The "Draft" setting is a 0.3 mm layer height and has a rougher finish and is ideal for non-aesthetic prototyping models.
-
The "Fine" setting is a 0.1 mm layer height and has a much smoother finish than the other settings. This is ideal for presentation models and parts that require a smooth finish.
-
-
Press "Apply".
-
Proceed to Checkout.
If you have any questions on the above, have more advanced requirements or would just much prefer to just email us please feel free to send your file through to hello@empire3D.com.au